7
Instruction Manual
COMPACT DC
1.- VERIFICATION UPON RECEPTION
Check the following points when you receive the device:
a) The device meets the specifications described in your order.
b) The device has not suffered any damage during transport.
c) Perform an external visual inspection of the device prior to switching it on.
d) Check that it has been delivered with the following:
- An installation guide,
-
COMPACT DC SBT,
COMPACT DC-S SBT,
COMPACT DC 3G
and
COMPACT DC-S 3G
models,
3 connection terminals.
-
COMPACT DC 4I
and
COMPACT DC-S 4I
models, 4 connection terminals.
-
COMPACT DC 2
model, 6 connection terminals.
-
COMPACT DC-S MINI
and
COMPACT DC-S BASIC
models, 2 connection terminals.
-
COMPACT DC 2 3G model
, 5 connection terminals.
If any problem is noticed upon reception, immediately contact the transport com-
pany and/or
CIRCUTOR's
after-sales service.
2.- INTRODUCTION
The
COMPACT DC
concentrator is a device that manages and reads single-phase and three-phase
energy meters with PRIME communications connected to the same low voltage network.
The
COMPACT DC
concentrator is typically installed in the transformer substation and enables tele-
management of the energy meters, whether by reading the information they supply or by carrying out
actions on this type of device, such as modifying tariffs, activating the circuit breaker, etc.
There are 10 device models:
COMPACT DC SBT�
COMPACT DC-S SBT�
COMPACT DC-S BASIC�
COMPACT DC 3G�
COMPACT DC-S 3G�
COMPACT DC-S MINI�
COMPACT DC 4I�
COMPACT DC-S 4I�
COMPACT DC 2�
COMPACT DC 2 3G�
