32
COMPACT DC
Instruction Manual
5�3�- METERS MENU: METER TABLE
Figure 31:Meter table�
This screen shows a table with all the energy meters logged in the
COMPACT DC�
As seen in
, the table includes the following fields:
#:
This column correlatively lists the devices logged in the concentrator. It is also used to display
or modify the current group of energy meters.
Identifier:
Meter identifier; that is, the first 3 letters of the manufacturer's name + the serial num-
ber.
MAC:
Single identifier of the PLC module (except the low voltage monitoring module which does
not have MAC).
Status:
Current status of the energy meter. There are 3 possible statuses, see
Table 18: Possible energy meter statuses�
Status
A
Active
A!
Active but still has never been associated.
TF
Temporary fault
PF
Permanent fault
S:
Shows the secondary where the energy meters are connected. This column only appears if the
DoubleSecondary
parameter is active.
Last communication:
Date of the device's last communication.
Active time:
Time the energy meter was active the previous day.
Model:
UNESA code of the device's model.
DLMS:
Firmware version of the DLMS protocol.
PRIME:
Firmware version of the PRIME protocol.
There are 5 buttons at the bottom of the table, with the following functions (
):