57
Instruction Manual
COMPACT DC
5�14�8� FTP CONFIGURATION
Figure 67:FTP configuration�
In this section you can configure the following setup parameters for the FTP:
IpFtp:
IP address of the server where the reports will be sent.
FtpUserReport:
Username for the server to which the reports will be sent.
FtpPwdReport:
Password for the server to which the reports will be sent.
IpFtp2:
IP address of the server 2 where the reports will be sent.
FtpUserReport2:
Username for the server 2 where the reports will be sent.
FtpPwdReport2:
Password for the server 2 where the reports will be sent.
IpFtp3:
IP address of the server 3 where the reports will be sent.
FtpUserReport3:
Username for the server 3 where the reports will be sent.
FtpPwdReport3:
Password for the server 3 where the reports will be sent.
DestDirReport:
Path of the server where the reports will be sent.
IpFtpDCUpg:
IP address of the server for downloading concentrator firmware.
UserFtpDCUpg:
Username of the server for downloading concentrator firmware.
PwdFtpDCUpg:
Password of the server for downloading concentrator firmware.
IpFtpMeterUpg:
IP address of the server for downloading energy meter firmware.
UserFtpMeterUpg:
Username of the server for downloading energy meter firmware.
PwdFtpMeterUpg:
Password of the server for downloading energy meter firmware.
RetryFtp:
Number of retries for accessing the FTP server.
TimeBetwFtp:
Time between retries for accessing the FTP server, in seconds.
FtpRandomDelay:
Random delay to send task reports, in seconds.
