manualshive.com logo in svg

Circassia NIOX VERO, User Manual

Share
Download
Circassia NIOX VERO User Manual Download Page 34

Chapter 7 Troubleshooting 

32

000190-09 NIOX VERO

®

 User Manual US

A56

Handle cap time out

Failure to press the forward button in 
time (within 2.5 min.). 
Repeat the QC measurement and make 
sure to press the forward button 
immediately after the Handle Cap is 
attached.

A57

NO scrubber analysis error

NO scrubber analysis phase error. 
Restart the QC measurement.

A80

The instrument is about to expire

Order a new instrument. This alert is 
visible when less than 500 
measurements remain or less than 120 
days until expiry date. 
Press OK to acknowledge. 

A81

The Sensor is about to expire

Order a new Sensor. This alert is visible 
when less than 10% of the 
measurements remain or less than 2 
weeks until expiry date. 
Press OK to acknowledge. 

Instrument 
alerts

Screen

Action

A82

The breathing handle is about to 

expire

This alert is visible when less than 100 

measurements remain or less than 2 
weeks until expiry date.
Press OK to acknowledge. Prepare to 
change breathing handle.

A90

All measurements on the instrument 
have been used

It is still possible to view measurements 
stored in the instrument memory.

A91

All measurements on the Sensor 
have been used. 

Replace the Sensor, see page 35.

A92

Instrument expiration date has 
passed

It is still possible to view measurements 
stored in the instrument memory.

Instrument 
alerts

Screen

Action

Summary of Contents for NIOX VERO
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands