Chapter 3 Installation and set up
000190-09 NIOX VERO
®
User Manual US
9
Start the instrument by sliding the ON/OFF button to
ON
and
allow the instru-
ment to start up and perform the internal check.
CAUTION!
After inserting a new Sensor it is recommended to wait for three
hours with the instrument switched on before performing a measurement.
10. When the internal check is completed, the main menu appears.
11. Select the
Settings
button on the main menu.
12. Select
Time and date.
This opens the Time and date setting view.
13. Select between 12h US and 24h ISO time and date
format.
14. Set time by pressing the button for hour. It changes
color to blue. Change the value to the current hour
by pressing the increase or decrease buttons.
Repeat this procedure for minute, year, month and
day.
15. Select
OK
to accept the changes and return to the main menu.
The
Undo
button
closes the view without saving any changes.
16. Select the
Settings
button on the main menu.
17. Select the
Breathing handle
button. This opens the Breathing
handle view.
18. Select the
Reset Breathing handle
button. The breathing
handle information view opens to confirm the insertion of the
breathing handle.
19. Select the
OK
button to confirm insertion of a new breathing
handle. This sets the remaining measurements to 1000 and expiry
date one year from the current date.
The
Return
button returns to Settings view without registering
change.
Summary of Contents for NIOX VERO
Page 54: ......
