CipherLab CP30 Series, Reference Manual, Page: 169 / 187

157
Appendix II Laser (SE955)
1 Data packet is a GS1-128 barcode (= data is preceded with
“
]JC1
”).
Note: UPC portion of composite is transmitted using UPC rules.
PDF417,
Micro PDF417 0 Scan engine is set to conform to protocol defined in 1994
PDF417 symbology specifications.

When this option is transmitted, the receiver cannot
reliably determine whether ECIs have been invoked or
whether data byte 92
DEC
has been doubled in
transmission.
1 Scan engine is set to follow the ECI protocol (Extended
Channel Interpretation). All data characters 92
DEC
are
doubled.
2 Scan engine is set for Basic Channel operation (no escape
character transmission protocol). Data characters 92
DEC
are
not doubled.
 When decoders are set to this mode, unbuffered Macro
symbols and symbols requiring the decoder to convey
ECI escape sequences cannot be transmitted.
3 The barcode contains a GS1-128 symbol, and the first
codeword is 903-907, 912, 914, 915.
4 The barcode contains a GS1-128 symbol, and the first
codeword is in the range 908-909.
5 The barcode contains a GS1-128 symbol, and the first
codeword is in the range 910-911.
A PDF417 barcode, ABCD, with no transmission protocol enabled, is
transmitted as
]L2
ABCD.
Data Matrix 0 ECC 000-140, not supported.
1 ECC 200.
2 ECC 200,
FNC1
in first or fifth position.
3 ECC 200,
FNC1
in second or sixth position.
4 ECC 200, ECI protocol implemented.
5 ECC 200,
FNC1
in first or fifth position, ECI protocol
implemented.
6 ECC 200,
FNC1
in second or sixth position, ECI protocol
implemented.
Maxicode 0 Mode 4 or 5
1 Mode 2 or 3
2 Mode 4 or 5, ECI protocol implemented.
3 Mode 2 or 3, ECI protocol implemented in secondary
message.