CipherLab CP30 Series Reference Manual Download

Page: 139 / 187

127

Chapter 9

More Applications

Full Restore Operation

2.1.

Select a desired backup file from the list.

3.2.

Tap [Restore].

4.3.

Tap [Start] to run the restore process.

Once the restore process is completed, you will be asked to perform a warm boot. Tap

[OK] to reboot the mobile computer.

Partial Restore Operation

2.1.

Double-tap a desired backup file from the list.

3.2.

Select the desired items.

4.3.

Tap [Restore].

5.4.

Tap [Start] to run the restore process.

Once the restore process is completed, you will be asked to perform a warm boot. Tap

[OK] to reboot the mobile computer.

Warning:

(1) You must perform a warm boot after the restore operation!

(2) You may encounter insufficient memory for the restore operation and be asked to

check memory space on the system (RAM), Flash Storage or microSD card. If you insist

on restoring it without deleting files, data loss or incomplete restore may occur.

格式化:

項目符號及編號

格式化:

項目符號及編號

Summary of Contents for CP30 Series




























































































































































































Search results

Summary of Contents for CP30 Series

Reviews:

Related manuals for CP30 Series

Brands by name

Popular brands

CipherLab CP30 Series, Reference Manual

Search results

Summary of Contents for CP30 Series

Reviews:

Related manuals for CP30 Series

Brands by name

Popular brands