Cinderella CINDERELLA GAS, User Manual

Page: 11 / 44

11
Construction
Cinderella’s internal components are manufactured from
acid-resistant stainless steel. The external shell is made from
a composite material. An internal fan cools the toilet and
extracts fumes and vapours. All components are thoroughly
tested and of high quality. Every toilet is subject to an extensi-
ve test program during the manufacturing process. Cinderel-
la has been tested by consumer safety testing bodie DBI and
bears the CE mark. The intelligent incineration system called
”SENSE” detects the appropriate time for termination of the
incineration process, and ensures optimal incineration times
and energy consumption.
Cinderella incineration toilet
Congratulations on the purchase of your new Cinderella incineration toilet!
Given correct use and maintenance, your incineration toilet will provide great service for many years. This user guide contains
information about use and maintenance. The user guide applies to the model Cinderella Gas. Information about installation is
included in the enclosed installation guide.
Cinderella has several safety functions
1. The incineration process is inactive while the toilet lid is open. The lid must be closed in order to ”flush” the toilet.
2. The hatch to the incineration chamber CANNOT remain open (e.g. during cleaning) while the toilet is still hot. This is only
possible when the toilet has cooled (the fan has stopped).
3. The temperature sensor will be triggered when the internal temperature of the shell unit is too high, and incineration will
then stop. This situation requires a manual reset before the toilet can be used again. Consult the section on faultfinding:
Heating circuit interrupted.
4. The incineration process will be halted if the ash container is incorrectly positioned. A red and yellow light will start flashing.
5. The toilet fan is programmed to run until the temperature inside the incineration chamber has dropped below 100°C.
6. The flame guardian cuts the gas supply if: - the flame goes out, - the burner backfires, - the gas/air ratio is wrong.
The control panel
Cinderella Gas has a display and LEDs for operating messages. Look at the illustration below. For explanation of the
messages, see page 14.
Gas connection
Control Panel
Temperature
sensor
Front hatch /
ash container
Ventilation
12V Power
Regulator
Error
Red light
Combustion
Yellow light
Start button
Language
select
Status
messages
Power
Green light
How to select a different language
1. Hold down the ’Language select’ button for 3 seconds until ” Language” is displayed on
the first text line, and the current language is displayed on the second line.
2. Push the ’language select’ button repeatedly until the desired language is displayed.
3. The new language is stored a few seconds after the last push, and the toilet resumes operation
Language select