19
Maintenance
Engine:
The operation and life of the engine depends on you and your operator. Do
not start engine until the engine precheck is complete. The engine precheck consists
of checking the oil, the fuel level, the hydraulic oil level and the air filter. Basic engine
maintenance is shown in Table 1 on page 34. For more detailed information please
refer to the Engine Operator Maintenance Manual and Warranty provided with your
Melter applicator.
NOTE: When breaking in a new Melter, we recommend running the engine for
one hour with no load prior to actual use on the job.
Air cleaner:
Due to the dusty conditions that can be created by road work, it is es-
sential to check the engine air cleaner element daily. Remove element and shake
out the accumulated dust and dirt. Wipe out dirt from inside cover and from housing.
Check engine manual for washing instructions. We recommend stocking replace-
ment filters.
Lubrication:
The Melter should be greased according to table 1 on page 20 of this
manual.
Diesel Units: Use of high quality detergent oil of API (American Petroleum Institute)
service class CC or CD grade. Select the viscosity based on the air tempera-
ture at the time of operation. Check your engine manual for other recommen-
dations.
Burner:
There are several items that need to be inspected periodically on the burn-
ers. These items include the burner motor brushes, the nozzle, electrode and head
position, chamber lining and the 4 electric eye. Inspect according to table 1 on page
20. There is a section on how to perform each of these operations in this manual,
check the index on pages 2 & 3 to locate the appropriate section.
