18
Adjusting Burner Nozzle, Electrode and Head Position
Step 3: Setting Electrode Position
Insert gauge as shown below. The electrode tip should be in line with the intersec-
tion of the cross hairs labeled "DC". If not, you must remove the head, then loosen
the electrode retaining screw just enough to allow you to slide the electrodes into the
proper location. Tighten the screws and replace the head.
Step 4: Setting Nozzle Position
Insert the gauge against the head. The end of the gauge should now touch the noz-
zle. If not, slightly loosen the knurled nut and the screw on the escutcheon plate until
the entire nozzle assembly can be moved forward or backward. Adjust accordingly
and tighten the knurled nut and screw.
