CIGWELD WELDSKILL 180, Service Manual, Page: 15 / 80

SERVICE MANUAL
180
0-5461 2-3 INTRODUCTION
2.05 Description
WeldSkill 180 Inverter
This compact heavy duty, inverter welding machine
has infinitely adjustable welding current from 10 to
180 amps. It runs standard general purpose 2.5mm
electrodes for light gauge work, generally less than
3.0mm thick, and 4.0mm electrodes for heavier ma-
terial. The unit also has a lift TIG function that offers
stable TIG welding characteristics when used with a
suitable TIG torch and shielding gas.
2.06 User Responsibility
This equipment will perform as per the information
contained herein when installed, operated, maintained
and repaired in accordance with the instructions
provided. This equipment must be checked periodi-
cally. Defective equipment (including welding leads)
should not be used. Parts that are broken, missing,
plainly worn, distorted or contaminated, should be
replaced immediately. Should such repairs or replace-
ments become necessary, it is recommended that
such repairs be carried out by appropriately qualified
persons approved by CIGWELD. Advice in this regard
can be obtained by contacting accredited CIGWELD
Distributor.
This equipment or any of its parts should not be al-
tered from standard specification without prior written
approval of CIGWELD. The user of this equipment
shall have the sole responsibility for any malfunction
which results from improper use or unauthorised
modification from standard specification, faulty
maintenance, damage or improper repair by anyone
other than appropriately qualified persons approved
by CIGWELD.
2.07 Packaged Item
WeldSkill 180 Inverter with Toolbox (Part No.
W1008180)
• WeldSkill 180 Inverter Power Source
• 4m Lead with Twistlock Electrode Holder
• 4m Lead with Work Clamp
• Shoulder Strap
• Toolbox
• Operating Manual
Art # A-12886