CIGWELD TRANSTIG 200 AC/DC Service Manual Download Page 2

Page: 2 / 128

WE APPRECIATE YOUR BUSINESS!

Congratulations on your new CIGWELD product. We are proud to

have you as our customer and will strive to provide you with the

best service and reliability in the industry. This product is backed

by our extensive warranty and world-wide service network. To locate

your nearest distributor or service agency please call

+61-3-9474-7400, or visit us on the web

www.cigweld.com.au.

This Operating Manual has been designed to instruct you on the

correct use and operation of your CIGWELD product. Your

satisfaction with this product and its safe operation is our ultimate

concern. Therefore please take the time to read the entire manual,

especially the Safety Precautions. They will help you to avoid

potential hazards that may exist when working with this product.

YOU ARE IN GOOD COMPANY!

The Brand of Choice for Contractors and Fabricators Worldwide.

CIGWELD is a Global Brand of Arc Welding Products for

Thermadyne Industries Inc. We manufacture and supply to major

welding industry sectors worldwide including; Manufacturing,

Construction, Mining, Automotive, Aerospace, Engineering, Rural

and DIY/Hobbyist.

We distinguish ourselves from our competition through market-

leading, dependable products that have stood the test of time. We

pride ourselves on technical innovation, competitive prices,

excellent delivery, superior customer service and technical support,

together with excellence in sales and marketing expertise.

Above all, we are committed to develop technologically advanced

products to achieve a safer working environment for industry

operators.

Summary of Contents for TRANSTIG 200 AC/DC

































































































































Search results

Summary of Contents for TRANSTIG 200 AC/DC

Reviews:

Related manuals for TRANSTIG 200 AC/DC

Brands by name

Popular brands

CIGWELD TRANSTIG 200 AC/DC, Service Manual

Search results

Summary of Contents for TRANSTIG 200 AC/DC

Reviews:

Related manuals for TRANSTIG 200 AC/DC

Brands by name

Popular brands