Mounting Options
8-3
3930 Service Delivery Switch
Hardware Installation and Start-up Manual
009-3223-001 Standard Revision E
Copyright
©
2012-2014 Ciena
®
Corporation
January 2014
The 3920, 3930, 3932, 3940, 3940, 3960, 5142 and 5160 chassis are a single
rack unit in height. For these units the bracket will be installed on the sides of
the chassis and near the front of the chassis. The 5140 and 5150 chassis are
2 rack units in height. For these units the bracket will be installed on the sides
of the chassis near the front, and towards the bottom of the unit. When
installed, the bottom of the unit will be positioned against the mounting
surface.
For a procedure see
“Installing the Wallmount Bracket” on page 8-6
19” Frame Mount Bracket - 1 RU
Orderable Part Number: 170-0602-903 (19” 1RU Mounting Bracket Kit)
Can be used to mount the following 1 RU products:
•
3920
•
3930
•
3932
•
3940
•
3960
•
5142
•
5160
The frame mount bracket is attached to the sides of an unpowered/
unconnected chassis and used to position the unit in a 19" frame. This bracket
kit also includes cable supports. The cable supports are installed on the
mounting brackets and are used to keep the cables out of adjacent equipment
space by directing them along the faceplate of the unit.
The mounting bracket kit includes:
•
two brackets (the same bracket is used for both the left and right sides),
•
two cable supports,
•
two 8-32 x 1/2 length pan head screws (used to attach the cable supports
to the brackets), and
•
eight 8-32 x 5/16 length pan head screws (used to attach the brackets to
the side of the chassis).
WARNING:
For units with side vent holes, the vent holes must be positioned at the
top when the chassis is wall mounted. In some cases where a particular direction (left
or right) is required for cable routing and faceplate access, the bracket may need to
be mounted with the flange at the top of the unit resulting in the unpainted underside
of the unit facing outward when installed.
Summary of Contents for 170-3930-900
Page 103: ......
