Ciena 170-3930-900, Hardware Installation And Start-Up Manual

Page: 48 / 104

3-4 Turning Up the System
3930 Service Delivery Switch Hardware Installation and Start-up Manual
009-3223-001 Standard Revision E
Copyright
©
2012-2014 Ciena
®
Corporation January 2014
For more information on associated features and managing software license
keys, see
39XX/51XX Software Management and Licensing .
For a procedure see “Managing Licenses” on page 3-11 .
Configuring the Remote Management Interface
The factory default IP address and subnet for the remote interface is
0.0.0.0:0.0.0.0 . These values will be entered if the system is reset to factory
defaults.
You can configure the remote management interface directly by using this
procedure, or automatically by using DHCP. See
“Configuring an Interface
using DHCP” on page 3-6 . The default priority for the remote management
interface defaults to 7 and is not configurable.
Note: The local and remote management interfaces cannot be configured
to the same IP subnet.
For more information on provisioning commands for the remote interface, see
the
39XX/51XX Command Reference .
Table 3-2
License Key Summary
Product Advanced-
10G
Advanced-
Ethernet
Advanced-
OAM
Advanced-
Security
Advanced-
Sync
MPLS PBB-TE
3902 x x x
3911 x x x
3916 x x x x x
3920 x x x
3930 x x x x x x x
3931 x x x x x x x
3932 x x x x x x x
3940 x x x x
3960 x x x x x
5140 x x x x
5142 x x x x x x x
5150 x x x x x x
5160 x x x x x x