2.3 Safety Decals
10
The safety decals affixed to this machine are in place to keep you safe. DO NOT
ignore these decals. Read and understand each decal’s safety message. The
following safety decals are affixed to this machine:
Do not place any part of body or limb under raised
loader arms, bucket, or attachments at any time.
To prevent serious injury or death from pinching:
• Keep all persons and objects clear while any
part of this machine is in motion.
To prevent serious injury or death:
• Relieve pressure on hydraulic system
before servicing or disconnecting hoses.
• Wear proper hand and eye protection
when searching for leaks. Use wood or
cardboard instead of hands.
• Keep all components in good repair.
HIGH-PRESSURE FLUID HAZARD
DANGER
HAZARD!
FLYING DEBRIS
STAY BACK
TO PREVENT DEATH OR
SERIOUS INJURY
DANGER
!
To prevent serious injury or death never operate in
populated areas or where throw objects could injure
persons or damage property.
• Never operate rotary cutter with deck raised
more than two (2) feet.
• Safety chain must be installed before operating.
To prevent serious injury or death never operate in
populated areas or where throw objects could injure
persons or damage property.
• Never operate rotary cutter with deck raised
more than two (2) feet.
• Safety chain must be installed before operating.
1
1
2
1
3
1
4
1
SCAN
TO VIEW
OWNER’S
MANUAL
SDBAMAN01
SEVERE DUTY
BENT AXIS PISTON
BRUSH CUTTER
Summary of Contents for Severe Duty 20-30 GPM Series
