CID Severe Duty 20-30 GPM Series, Owner'S Manual

Page: 30 / 52

Severe Duty Bent Axis Piston Brush Cutter
March 2021
29
4.6 Blade Removal
Blade Removal Procedure - Brush Cutter On The Ground
Cutter blades are sharp and could cut you if mishandled. ALWAYS wear
protective gloves and footwear when handling cutter blades.
Figure 4.6a Blade Holder Access Opening & Bolt Diagram
1. With the brush cutter on the ground, ensure the hydraulic hoses are
disconnected from the skid steer couplers.
2. SLOWLY rotate the blade holder until the blade holder nut is visible in the
access opening at top of the deck and loosen the blade holder nut. DO NOT
let bolt fall from holder. Repeat this step for the other three blade holder nuts.
See figure 4.6a below.
3. Rotate the blade holder until the three blade nuts are visible in the access
opening and remove the nuts and bolts. Repeat this step for each blade.
Access Opening
Blade Holder Bolt (3/4”-10 UNC 2.75 hex bolt)
Blade Bolts (3/4”-10 UNC 2.75 hex bolt)