CID Severe Duty 20-30 GPM Series, Owner'S Manual

Page: 18 / 52

Severe Duty Bent Axis Piston Brush Cutter
March 2021
17
5. Connect the attachment hydraulic hoses and the case drain hose to the
auxiliary supply couplers located on your skid steer loader lift arm.
6. Attach the safety chain to a secure place on the skid steer unit to limit the
height that the cutter can be raised.
DO NOT operate this machine if you can see the cutter blade while seated
in the operator’s seat. If the operator can see the cutter blade, the back of
the cutter is raised TOO HIGH lower ther cutter deck to avoid debris from
being thrown at the operator.
3.2 How To Connect Brush Cutter Attachment Cont.
Check that hydraulic hoses are locked into the skid steer couplers before
starting the cutter.
To keep contaminants from entering the hydraulic system, wipe off any
dirt or dust from the male or female hydraulic flat face couplers with a
clean rag before attaching hoses.
4. Activate your skid steer’s lever lock switch to lock the pins into the brush
cutter’s attachment plate. If your skid steer does not have this switch, manually
lock the levers as shown in Figure 3.2b below.
ATTACHMENT FLANGE
Ensure lock pins fully extend into
the attachment flange slots.
Coupler Levers Locked
Figure 3.2b Quick Attach Mechanism Locked to Attachment Plate