CID Severe Duty 20-30 GPM Series, Owner'S Manual, Page: 26 / 52

Severe Duty Bent Axis Piston Brush Cutter
March 2021
25
4.1 Maintenance Overview
The maintenance procedures described in this manual should only be carried out by
qualified mechanics who have been trained to repair this machine.
Some of the procedures may require special tools and skills. DO NOT attempt to
repair or perform service work on this machine unless you have the skills and tools
to do so. Contact your local dealer for maintenance and repair services.
Improper maintenance or modifications to the design or performance of this
machine will void the warranty. ONLY use genuine CID replacement parts on this
machine.
Obey the following safety instructions when servicing or repairing this machine.
Wear proper Personal Protective Equipment (PPE) while working on this machine,
which may include safety glasses, hard hats, steel toe boots, gloves, etc.
Wear a welding helmet when welding to protect your eyes, face and neck from flash
burn, ultra-violet radiation and heat.
Ensure all jack stands, lifts and hoists are in good working condtion and have the
rated load capacity to support the load.
Only perform service work in a well-lit area.
Allow the machine to cool down before servicing this machine. Hot oils can burn
your skin.
NEVER work under an unsupported cutter deck.