CI Systems
SR-800R
8.5
Disassembling the System
The sequence in disassembling the system is:
Shutting Down the System
(see Section
8.5.1
)
Draining the Fluid from the Blackbody
(see Section
8.5.2
)
Disconnecting the Pipes from the Blackbody
(see Section
8.5.3
)
Disconnecting the Dry Nitrogen Source and Cables
(see Section
8.5.4
)
Packing
(see Section
8.5.5
)
8.5.1
Shutting Down the System
1. Switch the SR-800R Controller OFF.
2. Switch OFF both Julabo Circulation System switches (refer to the
Julabo
Circulation System Operating Manual
).
8.5.2
Draining the Fluid from the Blackbody
1. Drain the fluid from the Julabo Circulation System fluid tank (refer to the
Julabo
Circulation System Operating Manual
).
2. Disconnect one of the pipes from the Julabo Circulation System. Using a high-
pressurized air hose and hand piece, force all the cooling fluid out of the pipes and
into the fluid tank.
3. Release and remove the Pipes from the Julabo Circulation System using a 19 mm
open-wrench (see
Figure 8-8
).
605-7040
Operation
Manual
Rev D
8-17
June 2013
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Summary of Contents for ControlMaster SR-800R
Page 17: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Page 35: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
Page 129: ...Artisan Technology Group Quality Instrumentation Guaranteed 888 88 SOURCE www artisantg com ...
