Chziri ZVF9V-G/P, User Manual

Page: 60 / 87

6.1 Schedule of Function Parameters 6.1 Schedule of Function Parameters
Group F5 Analog Input/Output Parameters
F5.00 AVI input lower limit voltage Setting range:
0.0V~upper limit voltage Default value: 0.0V
F5.00 and F5.01 are applied to set the maximum and minimum values for external
analog input voltage AVI, which should be set in accordance with actual situation of
input signals.
F5.02 ACI input lower limit current Setting range: 0.0mA~upper limit current
Default value: 0.0mA
F5.02 and F5.03 are applied to set the maximum and minimum values for external
analog input current ACI, which should be set in accordance with actual situation of
input signal.
TIP
Generally, ACI port is used as current input port. If necessary,
it can be used as voltage input port, which can be selected
through a jumperon the control panel.
Their correlation can be converted as 20mA=10.0V.
F5.04 Pulse input lower limit frequency Setting range: 0.0~upper limit frequency
Default value: 0.0KHz
F5.05 Pulse input upper limit frequency Setting range: Lower limit
frequency~20.0KHz Default value: 10.0KHz
F5.04 and F5.05 are applied to set the maximum and minimum values for external
input pulse, which should be set in accordance with actual situation of input signal.
F5.06 Minimal input corresponding frequency Setting range: 0.00~upper
limit frequency Default value: 0.00Hz
F5.07 Maximum input corresponding frequency Setting range: 0.00~upper
limit frequencyDefault value: 50.00Hz
This set of parameters is used to set the correlation between external analog input quantity and
the set frequency. The relationship between set frequency and frequency setting signal after
treatment of filtering and gain is shown in Fig.6-20. These two kinds of signals can realize the
characteristics of direct action and reaction separately. f
max
and f
min
in this figure refer
to the frequency corresponding to the upper limit of input and the lower limit of input
respectively.
F5.01 AVI input upper limit voltage Setting range: Upper limit voltage~10.0V
Default value: 10.0V
F5.03 ACI input upper limit current Setting range: Lower limit current~20.0mA
Default value: 20.0mA
Fig.6-16 Relation Curve of Input Quantity against Setting Frequency
F5.08 Analog input signal delay period Setting range: 0.1~50.0s Default value: 0.5s
This parameter is used to regulate the delay period of analog input signal.
F5.09 Multi-function analog output AFM Setting range: 0~7 Default value: 0
F5.10 Multi-function digit output DFM Setting range: 0~7 Default value: 2
This function is used to select output signal at the analog output port AFM and digital
output port DFM.
Frequency
Frequency
Output frequency
AFm:(0~AFM )=(0.00~ )
DFm:(0~DFM )=(0.00~ )
1:
AFm:(0~AFM
)=(0.00~ )
DFm:(0~DFM )=(0.00~ )
2:
AFm:(0~AFM
)=(0.00~ )
DFm:(0~DFM )=(0.00~ )
AFm:(0~AFM )=(0.00~ )
DFm:(0~DFM )=(0.00~ )
Upper limit value Upper limit frequency
Upper limit value Upper limit frequency
Setting frequency
Upper limit value Setting frequency
Upper limit value Setting frequency
Upper limit value 2 times for rated current
Upper limit value 2 times for rated current
Upper limit value 2 Motor synchronous rotating speed
Upper limit value 2 Motor synchronous rotating speed
Output current
3:Motor rotating speed