EN
EN
Product Overview
The solar-powered siren is a totally wireless siren, which can be
installed in driveways, gardens and all types of other external
locations. The strobe siren is battery powered and kept re-
charging by the built-in solar panel. The signal transmission
is all by wireless radio frequency which achieves significantly
wirefree transmission and enhances the flexibility to install.
The strobe outdoor siren can be used as a wireless siren by
connecting to the control panel as well as a standalone alarm
system to work with wireless accessories in same frequency by
learning.
PCB Layout
1 8 6 5 0
9V 6F22
Internal Tamper Switch
Siren Duration Setting
VoIume Setting Power On/Off
Learning Button
Arm/Disarm Tone Setting
Entry&Exit Delay Time Setting
Status LED Indicator
Alarm LED Indicators
Note:
The 9V battery is used to charge 18650 battery in case it is out of
power/with low power after a long-time storage. Use the 9V battery to
charge 18650 battery for 12 hours and then remove 9V battery before
installation.
External Tamper Switch
Sirens
Note:
The siren will sound immediately if the tamper switch is triggered.
*
The status LED light flashes every 5 seconds in Arm and Home
Arm mode but doesn't flash at all in Disarm mode.
Jumper Setup
Volume Setting
HIGH MUTE LOW
HIGH MUTE LOW
HIGH MUTE LOW
High
(default)
Mute
Low
Siren Duration Setting
5MIN 2MIN 30S
5MIN 2MIN 30S
5MIN 2MIN 30S
5
minutes
2
minutes
30
seconds (default)
Note:
To prevent possible hearing damage, it is suggested to avoid listening
at high volume level for long period.
