Chrysler Grand Caravan 2010 Owner'S Manual Download Page 80 | Manualshive

Page: 80 / 506

Chrysler Grand Caravan 2010 Owner'S Manual Download Page 80

WARNING!

Failure to comply with the following conditions
could result in serious injury of death:

•

The swivel seat should be locked in the forward-
facing position when using the booster seat with
the vehicle in motion.

•

Be certain that the seat cushion is locked securely
into position before using the seat. Otherwise, the
seat will not provide the proper stability for child
seats and/or passengers. An improperly latched
seat cushion could cause serious injury.

2. Place the child upright in the seat with their back
firmly against the seatback.

3. Grasp the latch plate and pull out the seat belt.

4. Slide the latch plate up the webbing as far as necessary
to allow the seat belt to go around the child’s lap.

NOTE:

The lap portion of the seat belt should be low on

the hips and as snug as possible.

5. Once the seat belt is long enough to fit properly, insert
the latch plate into the buckle until you hear a “click.”

6. To remove the slack from the lap belt, pull upward on
the shoulder portion of the seat belt.

Integrated Child Booster Seat

80

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
78
79
80
81
82
...
»

Summary of Contents for Grand Caravan 2010



























































































































































































































































































































































































































































































































Reviews:

No comments