Home
/
Chrysler
/
Grand Caravan 2010
/
Owner'S Manual

Chrysler Grand Caravan 2010, Owner'S Manual, Page: 434 / 506

Share

Page: 434 / 506

Chrysler Grand Caravan 2010 Owner'S Manual Download Page 434

WARNING! (Continued)

•

Do not allow petroleum based fluid to contami-
nate the brake fluid. Brake seal components could
be damaged, causing partial or complete brake
failure. This could result in an accident.

Automatic Transaxle

The automatic transaxle and differential assembly are
contained within a single housing.

The fluid level in the automatic transaxle should be
checked whenever the vehicle is serviced. Operation with
an improper fluid level will greatly reduce the life of the
transaxle and the fluid.

All four–speed transaxles are equipped with a conven-
tional filler tube and dipstick. If fluid is added, it should
be added through the filler tube.

All six–speed transaxles are equipped with a capped
dipstick tube. It is sealed and should not be tampered
with. Your authorized dealer has the necessary tools to
ensure that the fluid level is set properly.

Selection of Lubricant

It is important that the proper lubricant is used in the
transaxle to assure optimum transaxle performance. Use
only the manufacturer’s recommended transmission
fluid. Refer to “Fluids, Lubricants and Genuine Parts” in
this section for the correct fluid type. It is important that
the transmission fluid be maintained at the prescribed
level using the recommended fluid. No chemical flushes
should be used in any transaxle; only the approved
lubricant may be used.

434

MAINTAINING YOUR VEHICLE

«
...
432
433
434
435
436
...
»

Summary of Contents for Grand Caravan 2010



























































































































































































































































































































































































































































































































Reviews:

No comments