Chrysler Grand Caravan 2010 Owner'S Manual Download Page 46 | Manualshive

Page: 46 / 506

Chrysler Grand Caravan 2010 Owner'S Manual Download Page 46

NOTE:

•

After setting the Child Protection Door Lock system,
always test the door from the inside to make certain it
is in the desired position.

•

The power sliding side door switches will not open the
power sliding doors if the vehicle is in gear or the
vehicle speed is above 0 mph (0 km/h).

•

The power sliding door will operate from the outside
door handle, the RKE transmitter, the switches on the
overhead console, or the switches located on the trim
panel just in front of the power sliding door when the
shift lever is in PARK, regardless of the child lock lever
position.

LIFTGATE

On vehicles equipped with power locks, the liftgate can
be unlocked using the Remote Keyless Entry (RKE)
transmitter button, or by activating the power door lock
switches located on the front doors.

To open the liftgate, depress the liftgate release handle
located on the underside of the license plate bar and pull
the liftgate open with one fluid motion.

Liftgate Handle Location

46

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
44
45
46
47
48
...
»

Summary of Contents for Grand Caravan 2010



























































































































































































































































































































































































































































































































Reviews:

No comments