Home
/
Chrysler
/
Grand Caravan 2010
/
Owner'S Manual

Chrysler Grand Caravan 2010, Owner'S Manual, Page: 390 / 506

Share

Page: 390 / 506

Chrysler Grand Caravan 2010 Owner'S Manual Download Page 390

Jack Location

The jack, jack handle and winch handle tools are stowed
behind the rear left side trim panel in the rear cargo area.
Turn the two cover latches to release the cover.

Remove the pouch containing the scissors jack, jack
handle, and tools.

Spare Tire Removal

The spare tire is stowed inside a protective cover located
under the center of the vehicle by means of a cable winch
mechanism. The “spare tire drive” nut is located on the
floor, under a plastic cap at the front of the floor console.

NOTE:

The base console, if equipped, must be removed

to raise and lower the spare tire. Refer to “Console
Features” in Section 3 for the console removal procedure.

The tool pouch contains three pieces and can be as-
sembled into a spare tire hook; to remove the compact
spare tire/cover assembly from under the vehicle, or a
Winch “T” Handle; to raise/lower the compact spare
tire/cover assembly.

Jack And Tool Location

390

WHAT TO DO IN EMERGENCIES

«
...
388
389
390
391
392
...
»

Summary of Contents for Grand Caravan 2010



























































































































































































































































































































































































































































































































Reviews:

No comments