Home
/
Chrysler
/
Grand Caravan 2010
/
Owner'S Manual

Chrysler Grand Caravan 2010, Owner'S Manual, Page: 108 / 506

Share

Page: 108 / 506

Chrysler Grand Caravan 2010 Owner'S Manual Download Page 108

Illuminated Vanity Mirrors — If Equipped

An illuminated vanity mirror is located on the sun visor.
To use the mirror, rotate the sun visor down and swing
the mirror cover upward. The lights turn on automati-
cally. Closing the mirror cover turns off the lights.

uconnect™ phone — IF EQUIPPED

Refer to “uconnect™ phone” in the uconnect™ User
Manual located on the DVD for further details.

VOICE RECOGNITION (VR) SYSTEM — IF
EQUIPPED

Refer to “Voice Recognition (VR)” in the uconnect™ User
Manual located on the DVD for further details.

BLIND SPOT MONITORING — IF EQUIPPED

The Blind Spot Monitoring (BSM) system uses two radar-
based sensors, located inside the rear bumper fascia, to
detect Highway licensable vehicles (automobiles, trucks,
motorcycles etc.) that enter the blind spot zones from the
rear/front/side of the vehicle.

Illuminated Mirror

108

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
106
107
108
109
110
...
»

Summary of Contents for Grand Caravan 2010



























































































































































































































































































































































































































































































































Reviews:

No comments