Home
/
Chrysler
/
Grand Caravan 2010
/
Owner'S Manual

Chrysler Grand Caravan 2010, Owner'S Manual, Page: 391 / 506

Share

Page: 391 / 506

Chrysler Grand Caravan 2010 Owner'S Manual Download Page 391

Preparations For Jacking

1. Park the vehicle on a firm, level surface. Avoid ice or
slippery areas.

WARNING!

Do not attempt to change a tire on the side of the
vehicle close to moving traffic. Pull far enough off
the road to avoid being hit when operating the jack
or changing the wheel.

2. Set the parking brake.

3. Place the shift lever into PARK.

4. Turn OFF the ignition.

5. Turn on the Hazard Warning flasher.

Tools

1A – Spare Tire Hook

(Piece 1)

2A – Winch “T” Handle

(Piece 1)

1B – Spare Tire Hook

(Piece 2)

2B – Winch “T” Handle

(Piece 2)

1C – Spare Tire Hook

(Piece 3)

2C – Winch “T” Handle

(Piece 3)

6

WHAT TO DO IN EMERGENCIES

391

«
...
389
390
391
392
393
...
»

Summary of Contents for Grand Caravan 2010



























































































































































































































































































































































































































































































































Reviews:

No comments