Home
/
Chrysler
/
Grand Caravan 2010
/
Owner'S Manual

Chrysler Grand Caravan 2010, Owner'S Manual, Page: 378 / 506

Share

Page: 378 / 506

Chrysler Grand Caravan 2010 Owner'S Manual Download Page 378

Never exceed the maximum trailer tongue weight
stamped on your bumper or trailer hitch.

Consider the following items when computing the
weight on the rear axle of the vehicle:

•

The tongue weight of the trailer.

•

The weight of any other type of cargo/luggage or
equipment put in or on your vehicle.

•

The weight of the driver and all passengers.

NOTE:

Remember that everything put into or on the

trailer adds to the load on your vehicle. Also, additional
factory-installed options, or authorized dealer-installed
options, must be considered as part of the total load on
your vehicle. Refer to the Tire and Loading Information
placard in the “Tire-Safety Information” section of this
manual for the maximum combined weight of occupants
and cargo for your vehicle.

378

STARTING AND OPERATING

«
...
376
377
378
379
380
...
»

Summary of Contents for Grand Caravan 2010



























































































































































































































































































































































































































































































































Reviews:

No comments