PMA_CHR_CD40199_R01_allPIXA_SWIR_GigE_User_Manual.docx
15
◼
The allPIXA SWIR camera must be set up and installed in compliance with the instructions
contained in this manual.
3.5 Staff requirements
◼
The system owner must ensure that all persons working on the system are trained for the
required work and have read and understood this manual. This applies particularly to the
employees who only work occasionally with the allPIXA SWIR camera, for example, during
commissioning and maintenance work.
◼
Work on the electrical installation of the system may only be carried out by a qualified electrician
or persons who have undergone the necessary electrotechnical training under the supervision
of a qualified electrician, in compliance with applicable electrotechnical regulations.
◼
Be aware that only suitably trained and qualified persons are permitted to work with the allPIXA
SWIR camera. Such persons are qualified to work with the allPIXA SWIR camera device if they
are familiar with its assembly, installation, care, and all necessary precautionary measures.
◼
Assignments and responsibilities of the staff charged with operation, commissioning,
maintenance, and repair must be clearly defined and specified by the owner of the device in
which the allPIXA SWIR camera is installed.
3.6 Organizational measurements
◼
The instruction manual must be stored safely in the vicinity of the camera in operation.
◼
Information contained in this manual must be integrated into the documentation of the device in
which the allPIXA SWIR camera is installed.
◼
The allPIXA SWIR camera and all connected peripheries must be checked regularly for visible
external damages.
3.7 Safety instructions for maintenance / cleaning
◼
Before any service or maintenance work is carried out, the responsible staff must be informed.
◼
Deadlines and intervals for regular inspections must be complied with.
◼
Before maintenance is started, the allPIXA SWIR camera must be isolated from the power
supply.
◼
Due to the risk of fire, devices such as radiators, heaters, or lighting equipment must be allowed
first to cool down.
◼
Only technicians of the Chromasens GmbH are permitted to open or slacken screws or housing
sections of the allPIXA SWIR camera.
◼
Necessary repairs may only be carried out by Chromasens GmbH.
◼
Cleaning of the device is only allowed with a soft, lint-free cloth and Isopropanol (optional).
◼
To avoid damages, the camera should only be transported in its original packaging.
