Downloaded from Projector.com
AUDIO
RGB/COMPONENT
AUDIO
S-VIDEO VIDEO
L
R
IN
PUT1
IN
PUT2
Note
• The cables marked with * are commercially available.
• When connecting the projector to equipment with stereo sound output, be sure to connect the L/R audio output or
stereo audio cable. When there is no image input (blue background screen), there will be no audio output.
[Projector Side]
To S-VIDEO terminal
(used to connect
equipment with S
Video output terminal)
To VIDEO & AUDIO
L/R terminals
(this connection
enables image and
sound output)
To S Video
output terminal
To video/audio
output terminals
To AUDIO terminal
(used to connect
equipment with
component output
terminal)
To audio output
terminal
(on equipment
with component
output terminal)
To RGB/
COMPONENT
terminal
(used to connect
equipment with
component output
terminal)
(see below)
To Cr, Y, Cb
terminal (on
equipment with
component
output terminal)
Laser disk player
Video deck
DVD player
AV equipment
To Video/Laser Disk/DVD
AV cable
(supplied)
RCA-Dsub cable
(optional)
Stereo audio
cable*
S terminal
cable *
Note on RGB/COMPONENT terminal connection
1. The component signal cable is a 15-pin mini D-sub
←→
pin plug conversion cable.
15-pin mini D-sub
Pin plug
Pin 1
←→
R (Red)
Pin 2
←→
G (Green)
Pin 3
←→
B (Blue)
2. For input of a component signal, select [On] in [Component Selection] on the DISPLAY menu. (See page 27)
17
