Downloaded from Projector.com
Adjustment
• Adjust the height of the projector using two adjusters on the front.
• If the relation between the position of the projector and the screen is not correct, the image will be distorted and blurred.
Release the adjuster buttons to
fix the adjusters.
Note
• If you wish to lower the projector to its original position before storing it, press the adjuster buttons and slowly
lower the projector. It can then be stored easily.
Warning
• Place at least 30 cm (12 inches) away from the wall. Do not set up where ventilation is poor as this may lead to
fire.
• Do not place on a carpet or blanket as this may lead to fire.
• Do not block the ventilation holes on the front, right and left side, and back of the projector, as this may lead to fire.
Adjuster
Adjuster button
Lift the front of the projector,
then press the two adjuster
buttons on the sides of the
projector.
The adjuster legs will loosen and extend.
Up
Down
1
Turn the adjusters for fine ad-
justment.
2
3
15
