Downloaded from Projector.com
LAMP
MODE
TEMP.
STAND-BY
POWER-ON
AUTO
POWER
POWER
AUTO
MUTE
MODE
STATUS
CANCEL
KEYSTONE
VOLUME
ZOOM-PAN
MENU
ENTER
Turning the Projector On and Off
Turning On
Press the POWER button.
The POWER-ON LED lights green and the lamp
comes on.
POWER-ON LED display on projector top
Green (lit)
: In operation
Orange (lit)
: Standby status
Orange (flashing) : Lamp cooling
Important
• Always remove the lens cap before turning the
lamp on, otherwise the lens cap may become
deformed.
• The power cannot be turned off by pressing the
POWER button again for 1 minute after the
lamp comes on.
• Turn the projector on before turning the PC on,
otherwise the image display may be adversely
affected.
POWER BUTTON WAS PUSHED!
Push POWER button or
Move the cursor to “Power Off”
and push ENTER button
to turn projector off.
Power Off Cancel
(When the button on the unit is pressed)
Basic Operation
Connecting Power Source
1
Turning Off
Press the POWER button.
The confirmation screen is displayed.
(When the button on the remote control unit is
pressed)
2
Plug the power cable (supplied)
into the power terminal on the
back of the projector.
POWER BUTTON WAS PUSHED!
Push POWER button again to turn
projector off.
To cancel, push AUTO button or
MODE button.
ENTER button
Insert the power plug into the
power socket.
The POWER-ON LED lights orange and the
projector is in standby status.
AUTO button
POWER button
MODE button
POWER button
MODE button
AUTO button
Adjustment button
POWER-ON LED
18
