If more downward tilt of the speaker is required, remove two flat head bolts from the top-front
of the speaker, and two from the bottom-rear of the speaker, and insert the eye-bolts into
these holes.
10. Attach the rigging cables to the eye-bolts.
11. Hang the speaker.
Connecting the speaker wires
Once the speaker is installed, connect the speaker wires to the amplifier.
Notice. Failure to comply with the following may result in property damage.
•
Always turn off and disconnect the amplifiers from power before making audio connections or
servicing a speaker.
1. These speakers are bi-amped, with distinct negative and positive input terminals for the low
frequency and mid/high frequency sections. Connect the separate low frequency and mid/
high frequency speaker wires to the negative (A) and positive (B) terminals on the back of
the speaker.
if creating crimped spade lug terminations, use a #8 spade lug (P/N: 145-159106-XX).
Installation
Christie Vive Audio LS1/LS2 Line Source Speakers User Manual
15
020-102170-01 Rev. 1 (06-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.
