9. Ensuring that the bottom of the brackets are parallel to the platform, tighten the bolts on
both adjustable bracket plates to the torque of 2.1 N*m (19 in*lbf), securing them to the
speaker.
10. Using a laser alignment tool and the document referred to in step 5, adjust the horizontal aim
of the speaker.
11. Tighten the bolts on both fixed bracket plates to the torque of 2.1 N*m (19 in*lbf), securing
them to the speaker.
Ensure that the bottom of the brackets are parallel to the platform.
12. Secure the adjustable bracket plates to the platform using appropriately sized lag bolts (not
provided in the box) according to laws and regulations applicable to the venue.
13. Secure the fixed bracket plates to the platform using appropriately sized lag bolts (not
provided in the box) according to laws and regulations applicable to the venue.
Securing the speaker to the platform with a backwards tilt
If you have determined that the speaker should be platform mounted tilted backwards, complete this
procedure.
Laser alignment is required when installing this speaker.
For detailed laser alignment instructions, refer to Vive Audio Line Array and Line Source Laser
Alignment Procedures (020-101406-XX) (https://www.christiedigital.com).
1. Remove the four flat head M10 bolts from the bottom corners of the speaker.
2. Remove the two fixed and two adjustable bracket plates from the speaker packaging.
A
Adjustable plate
B
Fixed plate
3. Loosely attach the fixed plates to the bottom of the speaker, placing the bolts removed in step
1 into the left-rear and right-rear holes.
Installation
Christie Vive Audio LS1/LS2 Line Source Speakers User Manual
11
020-102170-01 Rev. 1 (06-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.
