A
Adjustable plate
B
Fixed plate
3. Loosely attach the fixed bracket plates to the bottom of the speaker, placing the bolts
removed in step 1 into the left-front and right-front holes.
4. Position an adjustable plate along the bottom edge of the speaker, in front of the right-rear
hole.
5. Using two people and a laser alignment tool, determine the appropriate tilt required.
6. Line up the hole in the speaker with the nearest numbered hole in the adjustable plate.
Each numbered hole represents the angle (in degrees) that the speaker is tilted when secured
in that position.
7. Loosely attach the adjustable bracket plate to the bottom of the speaker, placing the bolt
removed in step 1 into the hole.
8. Repeat steps 5 and 6 on the left-rear side of the speaker.
Ensure that when you attach the left-rear adjustable bracket plate, you are using the same
tilt angle and numbered hole as the right-rear adjustable bracket plate.
Installation
Christie Vive Audio LS1/LS2 Line Source Speakers User Manual
10
020-102170-01 Rev. 1 (06-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.
