4. Position an adjustable plate along the bottom edge of the speaker, in front of the right-front
hole.
5. Using two people and a laser alignment tool, determine the appropriate tilt required.
6. Line up the hole in the speaker with the nearest numbered hole in the adjustable plate.
Each numbered hole represents the angle (in degrees) that the speaker is tilted when secured
in that position.
7. Loosely attach the adjustable bracket plate to the bottom of the speaker, placing the bolt
removed in step 1 into the hole.
8. Repeat steps 5 and 6 on the left-front side of the speaker.
Ensure that when you attach the left-front adjustable plate, you are using the same tilt angle
as the right-front adjustable plate.
9. Ensuring that the bottom of the brackets are parallel to the platform, tighten the bolts on
both adjustable bracket plates to the torque of 2.1 N*m (19 in*lbf), securing them to the
speaker.
Installation
Christie Vive Audio LS1/LS2 Line Source Speakers User Manual
12
020-102170-01 Rev. 1 (06-2016)
Copyright
©
2016 Christie Digital Systems USA Inc. All rights reserved.
