Christie Solaria One, Service Manual

Page: 35 / 88

Section 3: Parts and Module Replacement
Solaria One/Solaria One
+
Service Manual 3-7
020-101039-02 Rev. 1 (06-2013)
7. Remove the four screws that secure the skin to the corner brackets.
8. Remove the five screws from the bottom edge of the skin.
9. Pull the cardcage panel out.
3.10 Remove the Rear Skin
The rear access frame interlocks with the side skins.
1. Turn the lamp off and cool the projector for at least 15 minutes.
2. Turn the projector off and then disconnect it from AC power.
3. Remove the top lid. See
Remove the Top Lid on page 3-4 .
4. Remove the touch panel controller (TPC). See Remove the Touch Panel Controller on page 3-5 .
5. Remove the safety shield. See Remove the Safety Shield on page 3-9 .
6. Remove the 2 screws securing the TPC harness to the rear skin.