2-10
J Series 2.0, 2.4, and 3.0 kW Setup Guide
020-100751-03 Rev. 1 (02-2014)
Section 2: Installation and Setup
2.3
Projector Communications
2.3.1 Status LEDs
Looking from the back of the projector, the LEDs represent, from left to right; Lamp, Communications, Status,
and Shutter. The LEDs will display the colors as shown below:
STATUS LED
LED #
LED STATE
Lamp
1
Off
- Lamps are off
Yellow
- Lamp time has expired and lamp should be replaced
Green
- Lamp is on and operating correctly
Flashing Red
- Lamp has malfunctioned
Flashing Yellow
- Lamp door is open
Comm
2
Flashing Green
- Projector communication in progress
Status
3
Off
- AC power is off
Yellow
- AC is present but projector is in standby
Green
- Projector is powered up and operating normally
Flashing Red
- Error has occurred. Details are displayed on the status display
Shutter
4
Green
- Shutter is open
Yellow
- Shutter is closed
NOTE:
A condition occurs on the first power on after a software upgrade, and is indicated by all the following:
•
The Status LEDs are cycling green
•
The LCD displays the warning “Image Processor Upgrading”
•
The LED on the Image Processor card flashes green
•
The Web page shows a warning that the Image processor card is upgrading.
When this occurs, the projector should not be AC power cycled and the Image Processor card should not be removed.
Summary of Contents for J 2.0 kW
