FHD552-X LCD Panel User Manual
30
020-000741-01 Rev. 1 (07-2014)
Operation
Turning on the Power
1. Turn on your source components.
2. Plug the female end of the supplied power cord into the AC receptacle on the side of the display
(AC 100V ~ 240V).
3. Connect the other end to your AC power source.
4. Turn on the main power switch at the side of the display. The power
indicator lights orange to indicate that the display is in “standby”
mode.
5. Press the power button (
) on the remote control to turn on the
display (or press the power button (
) on the keypad). After a
brief warm-up period, the display will display an image.
Changing the OSD Language
The display OSD language is initially set to English, but can also display the menus in Simplified
Chinese, French, German, Italian, Portuguese, Russian, Spanish, Korean or Japanese. To change
the OSD language:
1. Press MENU.
2. Select Basic Settings from the Main Menu.
3. Select OSD Language from the Basic Settings Menu.
4. Press or to select the desired language and press ENTER. The change takes effect
immediately.
Avoiding Image Retention
Follow the recommendations below to prolong the life of the display.
Operate the Display Within Its Rated Ambient Environment
• Operating temperature: 0°C to 40°C (32°F to 104°F)
• Relative humidity: 85%, maximum.
Do not display static (non-moving) content on the display for long periods of time.
This may cause image “burn-in” or image retention, which is not covered under warranty.