manualshive.com logo in svg

Christie FHD552-X, User Manual, Page: 18 / 70

Share
Download
Christie FHD552-X User Manual Download Page 18

   Controls and Functions

FHD552-X LCD Panel User Manual

18

020-000741-01 Rev. 1 (07-2014)

4. DisplayPort

DisplayPort 1.1a and DisplayPort-HDCP 1.1 compliant, SD/HD input for connecting SDTV, EDTV 
or HDTV component video sources.

5. HDMI 1, HDMI 2

Two (2) HDCP-compliant digital video inputs for connecting HDMI or DVI sources.

6. DVI-D In (HDCP-compliant)

VESA-standard digital video input from a personal computer, or digital video from a DVD player 
or HD set-top box. 

7. VGA In (15-pin D-Sub)

For connecting components that have RGB or component output jacks such as a personal 
computer or external DTV decoder (a break-out cable is needed for BNC-type connection). 

8. PC Audio In 

Connect the audio output from a personal computer here. 

9. IR Extender

Connect the IR Extender cable provided with the display to this input. 

10. Audio Out 

For connecting external, powered speakers or an external audio receiver/amplifier. 

11. Component

Standard- or high definition (up to 1080p), YPrPb component video input.

12. Comp. Audio

Stereo audio input from the Component video source.

13. S-Video

Standard S-video input for connecting a VCR, camcorder, gaming console, Super VHS (S-VHS) 
VCR or other S-video source.

14. Video

Standard composite input for connecting a VCR, camcorder, gaming console or other composite 
video source.

15. Video / S-V Audio

Stereo audio input from the Composite or S-video source.

16. RS232C In

A female, 9-pin D-sub connector for interfacing with a PC or home theater automation/control 
system. 

17. RS485 In

A female, 8-pin RJ-45 connector that connects to the previous display in a video wall. 

18. RS485 Out

A female, 8-pin RJ-45 connector that connects to the next display in a video wall.

i

 

If both the Composite and S-video inputs are connected to sources, the S-video input takes 

precedence.

Summary of Contents for FHD552-X







































































Reviews:

No comments