manualshive.com logo in svg

Christie FHD552-X, User Manual, Page: 22 / 70

Share
Download
Christie FHD552-X User Manual Download Page 22

   Installation

FHD552-X LCD Panel User Manual

22

020-000741-01 Rev. 1 (07-2014)

Quick Setup

Here is a quick overview of the display installation process. The sections following this one provide 
detailed instructions. 

Installation Considerations

Proper installation of your display will ensure a satisfying viewing experience. Whether you are 
installing a display temporarily or permanently, you should take the following into account to ensure 
your display performs optimally.

Handling Guidelines

Super-narrow bezel displays are inherently very fragile devices. To avoid damaging your LCD panel, 
follow these guidelines when handling or moving the panel. Please note that damage die to 
improper handling is not covered under warranty.

• Always use the handles on the back of the LCD panel. Do not hold the display by its edges 

(outer bezel).

• Two people are required when moving or raising the LCD panel. Use both hands, one positioned 

on the top handle and the other on the bottom handle.

• Do not twist or bend the panel.

• Hold and support the LCD panel at each side and keep at an even height above the ground.

• Use a cart to move multiple panels at one time.

• When the panel is sitting on a surface, do not tilt it more than 10° to avoid damaging the 

screen.

Step

Procedure

For Details, Refer to 
page...

1

Mount the display(s) on a wall (optional)

23

2

Connect other external equipment to the display (optional):

• Automation/control system (RS232 or Ethernet)
• IR extender

24
25

3

Connect signal sources to the display

25

4

For video wall installations, connect video cables and control cables to each 

display in a series (optional)

5

Apply power to the display

28

6

Change the OSD language (optional)

30

7

Display calibration: adjust the following for each input:

• Aspect ratio

• Color level

• Brightness

• Tint

• Contrast

• Input position

• Color temperature and white balance

33

Summary of Contents for FHD552-X







































































Reviews:

No comments