manualshive.com logo in svg

Christie FHD552-X, User Manual, Page: 23 / 70

Share
Download
Christie FHD552-X User Manual Download Page 23

   Installation

FHD552-X LCD Panel User Manual

23

020-000741-01 Rev. 1 (07-2014)

Ambient Heat

Keep the ambient temperature constant and below 40°C (104°F). Keep the display away from 
heating and/or air conditioning vents. 

Ventilation

If you are mounting the display in an enclosure, leave sufficient space on all sides between it and 
surrounding objects, as shown below. This allows heat to disperse, maintaining the proper 
operating temperature. For very thin installations, to mount the display close to a wall it may be 
necessary to remove the handles prior to installation.

Mounting the Display

You can mount the display on a wall. 

If you do decide to wall-mount the display, ensure that the wall-mount bracket is installed 
according to the instructions included with it. The wall must be capable of supporting a redundant 
weight factor three (3) times the weight of the display, or be reinforced. 

We recommend that this be done by a custom installation specialist. 

Use only the approved wall-mount kit designed for your display.

Wall

10 mm

(0.39

"

)

Summary of Contents for FHD552-X







































































Reviews:

No comments