Electronics
HS Series 2K Service Manual—DWU1612-HS,DWU2022-HS
80
020-001790-01 Rev. 1 (03-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
9. Remove the insulation covers.
10. Unplug the positive pole of AC inlet.
11. Remove the switch of AC inlet from the bracket.
12. Remove the
M3 ground
screw securing the ground lead.
13. Unplug the negative pole of AC inlet.
14. Remove the AC inlet from the
bracket hole.
15. Replace the
AC inlet.
16. To re-install, follow these steps in reverse order.
Removing the thermal switch
The thermal switch prevents the projector from operating when the temperature of engine is
overheated.
1. Remove the top cover.
2. Remove the main board module.
See
3. Remove the main board bottom shielding.
See
4. Remove the rear cover.
Summary of Contents for DWU1612-HS
Page 1: ...HS Series 2K DWU1612 HS DWU2022 HS Service Manual 020 001790 01...
Page 107: ......
