Christie DWU1612-HS, Service Manual

Page: 65 / 107

Projector covers and feet
HS Series 2K Service Manual—DWU1612-HS,DWU2022-HS 65
020-001790-01 Rev. 1 (03-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
13. Remove the 28 M3 screws with a Phillips #1 screwdriver securing the bottom cover.
14. Remove the base shielding from the bottom cover.
15. If required, replace the bottom cover.
16. To re-install, follow these steps in reverse order.
Replacing a projector’s foot
The adjustable feet can be raised or lowered when positioning the projector to make sure it is level
on all sides so the displayed image appears rectangular without any keystone.
1. Ensure the projector is in a secure position.
Christie does not recommend having the projector overhang when replacing the feet, unless the
projector is securely positioned.
2. Remove the top cover.
See Removing the top cover on page 59.
3. Remove the main board module.
See Replacing the main board on page 94.
4. Remove the main board bottom shielding.
See Removing the rear cover on page 59.
5. Remove the rear cover.
See Removing the rear cover on page 59.
6. Remove the I/O board.
See Removing the I/O board on page 99.
7. Remove the front cover.
See Removing the front cover on page 61.
8. Remove fan 7.
See Replacing fan 7 on page 69.