Christie DWU1612-HS, Service Manual

Page: 62 / 107

Projector covers and feet
HS Series 2K Service Manual—DWU1612-HS,DWU2022-HS 62
020-001790-01 Rev. 1 (03-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
See Replacing the front IR sensor boards on page 93.
11. Transfer the IR sensor board to the new front cover.
12. If required, replace the front cover.
13. To re-install, follow these steps in reverse order.
Removing the right-side cover
The right-side of the projector is determined by facing forward from rear of the projector.
1. Remove the top cover.
See Removing the top cover on page 59.
2. Remove the main board module.
See Replacing the main board on page 94.
3. Remove the main board bottom shielding.
See Removing the rear cover on page 59.
4. Remove the front cover.
See Removing the front cover on page 61.
5. Remove the rear cover.
See Removing the rear cover on page 59.
6. Remove the five M3 screws with a Phillips #1 screwdriver securing the right-side cover.
7. Remove the right-side cover from the projector.
It will still be attached to the cord of the filter-R switch.
8. Remove the filter-R switch.
See Removing the filter-R switch on page 73.
9. Transfer the filter-R switch to the new right-side cover.
10. If required, removing the right-side cover.
11. To re-install, follow these steps in reverse order.