Service setups
HS Series 2K Service Manual—DWU1612-HS,DWU2022-HS
23
020-001790-01 Rev. 1 (03-2020)
Copyright ©2020 Christie Digital Systems USA Inc. All rights reserved.
7. After completing the adjustment, tighten the screw on the side of the gear as indicated by the
arrow.
Calibrating the lens
Always perform a lens calibration after repairing the main board or replacing the light engine.
1. Place the projector on a clean horizontal surface.
2. On the IR remote keypad, press
Menu
and select
Configuration > Lens Setting
.
3. Select
Lens Calibration
.
4. Press
Enter
.
Analog digital convert calibration
If the color appears abnormal after upgrading the scalar firmware, perform an analog digital convert
(ADC) calibration.
Warning!
If not avoided, the following could result in death or serious injury.
• Do not stare into beam when the projector is on. The bright light may result in permanent eye
damage.
ID
Part name
Description
1
Inspection item
Check if the lens shift is moving smoothly.
2
Criteria
The lens shift is moving smoothly.
Warning!
If not avoided, the following could result in death or serious injury.
• Do not stare into beam when the projector is on. The bright light may result in permanent eye
damage.
The screw
ABC adjustment gear
Summary of Contents for DWU1612-HS
Page 1: ...HS Series 2K DWU1612 HS DWU2022 HS Service Manual 020 001790 01...
Page 107: ......
