Section 2: Installation and Setup
Christie DS+60/DW30/Matrix 3000 User’s Manual 2-11
Figure 2.6.
Adjusting projector height
You can modify the height of the
projector to remedy a slightly
unlevel mounting surface by
adjusting the three feet threaded
into the bottom chassis. Turn each
foot clockwise or counter-
clockwise until the project is level
on all sides. (Figure 2.7.)
NOTE: The front of the projector can be
raised up to 10 degrees. (Figure 2.8.)
Folded Optics
In rear screen applications where space behind the projector is limited, a mirror may
be used to fold the optical path. See Figure 2.9. The position of the projector and
mirror must be accurately set – if considering this type of installation call your dealer
for assistance.
Figure 2.9.
Figure 2.7.
Figure 2.8.
