Section 6: Specifications
Christie DS+60/DW30/Matrix 3000 User’s Manual 6-3
Composite Video and S-Video
Signal Formats
Composite-video
(CVBS),
S-video
Y/C)
Video Standards
NTSC, NTSC 4.43, PAL, PAL M,
PAL N, PAL60, SECAM
Input Levels
Composite-video:
1.0Vp-p
±
3db (including sync tip)
S-video luma (Y):
1.0Vp-p
±
3dB (including sync tip)
S-video chroma (C):
630mV nominal (burst)
DC Offset
±
2V
Nominal Impedance
75 ohms
Return Loss (VSWR)
20dB min (1.2:1 max.) @ 6 MHz
DVI-I – Analog
Input Characteristics
Same as Analog RGB except as
noted
below.
Formats
RGB or YPbPr – video signal cannot
be routed to the decoder.
Sync Types
Separate H and V
(direct or swapped)
Bi-level – TTL levels only
Composite (XOR, OR)
Sync-on-green
Serrations and/or Equalization pulses
MacroVision
(standard & progressive)
DVI-I – Digital
Input Characteristics
meets DVI spec
DVI Cable Length
5m
EDID
Supported
HDCP (High Speed Digital Content Protection) Supported
RS-232 Serial Input
Connector Type
1 male DB9 (RS-232 out)
1 female DB9 (RS-232 in)
RS-422 Serial Input
Connector Type
1 female DB9 connector
Network Control
Ethernet
1 RJ45 connector
Max. Baud Rate
115200
Remote
Control
Type
IR with wired ability
Range 30
meters
Laser Pointer
Included
Battery Type (2 required)
AA, 1.5V Alkaline
Wired Control
Connector Type
3.5mm plug
Input Levels
High:
2.2V min.
Low:
0.9V
max.
Power:
500mA @ 5V
