3-4
CP2220 Setup Guide
020-100476-05 Rev. 1 (05-2014)
3.3
Connect Devices to the GPIO Port
The GPIO port is a 37-pin D-sub connector (female) located on the PIB input panel and provides 8 input and 7
output signals for connecting external devices to the cinema projector. To configure the pins on the connector,
tap
Menu
>
Administrator Setup
>
GPIO Setup
.
As shown below, each available pairing of pins (+/–) is defined as either an
input
or
output
. Four inputs and
three outputs have already been predefined. Configure a pin as an input if you want the cinema projector to
respond to an incoming signal, or as an output if you want an external device to respond to the cinema
projector.
Inputs
Positive
Negative
Description
GPIN #1
Pin 1
Pin 20
3-D L/R Input Reference
GPIN #2
Pin 2
Pin 21
3-D L/R Display Reference
GPIN #3
Pin 3
Pin 22
Reserved
GPIN #4
Pin 4
Pin 23
Reserved
GPIN #5
Pin 5
Pin 24
Input
GPIN #6
Pin 6
Pin 25
Input
GPIN #7
Pin 7
Pin 26
Input
GPIN #8
Pin 8
Pin 27
Input
Outputs
Positive
Negative
Description
GPOUT #1
Pin 9
Pin 28
External 3-D L/R Output Reference
GPOUT #2
Pin 10
Pin 29
Reserved
GPOUT #3
Pin 11
Pin 30
Reserved
GPOUT #4
Pin 12
Pin 31
Output
GPOUT #5
Pin 13
Pin 32
Output
GPOUT #6
Pin 14
Pin 33
Output
GPOUT #7
Pin 15
Pin 34
Output
PROJ_GOOD
Pin 16
Pin 35
cinema projector Good
Pin 1
19
20
Pin 37
GPIO Connector
Figure 3-3 Admin: GPIO Setup Window and GPIO Port Location on cinema projector