CP2220 Setup Guide
3-1
020-100476-05 Rev. 1 (05-2014)
3 Connect Devices to the Cinema Projector
This section provides information and procedures for connecting input devices to the cinema projector. You
connect input devices to the cinema projector Intelligence Board (PIB) located on side of the cinema projector.
These communication ports are accessible by removing the side source and communication access panel.
When connecting devices, route all cables along the channels located on the bottom of the cinema projector
and up through the opening in the frame to the communication connection port.
Replace the access panel to ensure server and source connections remain secure.
From Cinema
Server
OR
Connect to AC at site
Connect to Ethernet hub
Cinema Server
Figure 3-1 Connecting Cinema Sources
